Tip: press / anywhere to search. Or open a random note →

Handwritten one-page note: How to Bleed a Radiator
Tap the note to see it full size

Life skills One-page note UK only

How to Bleed a Radiator

Radiator cold at the top? Often all you need is a cheap radiator key. Here's how, in one page. Save this page.

Good to know

General info (Baxi, Worcester Bosch, HSE). Gas appliance work: Gas Safe registered engineers only (UK).

What's on the page

The note as text, so you can read it, copy it or use a screen reader.

Does it need bleeding?

  • Cold at the top, warm below
  • Noisy when it warms up

Get ready

  • Heating on: feel which radiators are cold on top
  • Heating OFF, let them cool
  • Radiator key and a cloth

Bleed it

  • Key into the valve at the top
  • Turn anticlockwise slowly: air hisses out
  • Water comes out? Turn clockwise to close

After

  • Check boiler pressure: about 1–1.5 bar
  • Low? Top up (see your boiler manual)
  • Heating on, check for cold spots

Call a Gas Safe engineer if

  • Still cold at the bottom (may be sludge)
  • Rust or water around the radiator
  • Needs bleeding often (may be a leak)

Mistakes

  • Bleeding while the radiators are hot
  • Forgetting to check boiler pressure

Sources

  1. Baxi: How to bleed a radiator in 8 simple steps
  2. Worcester Bosch: How to bleed a radiator
  3. Worcester Bosch: How often should I need to top up the pressure in the heating system?
  4. HSE: Domestic gas – frequently asked questions

How we checked this

Every fact on this note comes from the 4 sources listed here, checked against official or peer-reviewed sources where possible. AI tools help with drafting; a person checks every fact against the sources. How we research

Spotted a mistake? Tell us and we'll fix it and log it on the corrections page.

More from Life skills

All Life skills notes →